Design studio CNC jaali designs Updated October 2026
CNC design studio

CNC jaali designs for almirah, partition, mandir and doors

Pick a design, choose where it goes and its size, and see it in the room. Download the DXF for your CNC operator and a measured drawing for your carpenter. Send us the design and size; we'll suggest the right board and share a quote.

Designs221 patterns
Uses13 with sizes
FilesDXF PDF, SVG

Preview your jaali panel

Mughal stars and crosses

Partition, Mandir, Door · 12 mm and up

Size

= 3 ft 11.2 in x 7 ft 10.5 in. Fits one 8 x 4 ft board (2440 x 1220 mm).

Finish

Board: MDF 12 mm. 12 to 18 mm, MDF or HDHMR. Painted MDF suits dry indoor areas.

Cutting file
Motif size 100 %
Bars auto
Cut in
Router bit
Drawing
Send on WhatsApp

Board guide

Which board and thickness for a CNC jaali?

MDF for painted indoor jaali, HDHMR where it gets humid, WPC where it gets wet. Use 12 to 18 mm for partitions and doors, 6 to 12 mm for wall art, mandir back panels and ceiling panels.

UseBoardThickness
Almirah or wardrobe shutterHDHMR or MDF18 mm
Kitchen shutter insertHDHMR12 to 18 mm
Room partitionMDF or HDHMR, painted or PU12 to 18 mm
Mandir back panelMDF, painted or PU6 to 12 mm
Mandir or main-door insetMDF or HDHMR12 to 18 mm
Door and window jaaliHDHMR, or WPC where it gets damp12 to 18 mm
False-ceiling panelMDF6 to 12 mm
Wall art and headboardMDF, or plywood with veneer6 to 12 mm
Bathroom, balcony, wash areaWPC12 to 18 mm
Gate or outdoor railingWPC, or metal sheet from a fabricator18 mm board
Questions

CNC jaali questions, answered.

Updated October 2026

MDF is the usual choice for indoor CNC jaali because it cuts clean and takes paint or PU without grain showing. HDHMR is denser and handles humidity better, so it suits kitchens and doors. Use WPC where there is moisture, like bathrooms and balconies. Plywood with veneer gives a natural wood look, but its cut edges show the layers.

Use 12 mm to 18 mm for a partition or a door, so the thin bars between cut-outs stay strong. Wall art, mandir back panels and false-ceiling panels can be 6 mm to 12 mm because they are fixed to a wall or frame. Finer patterns need the thicker end of each range.

Measure the opening first. Good starting sizes are 450 or 600 x 2100 mm for almirah shutters, 450 x 720 mm for kitchen shutter inserts, 900 x 2100 or 1200 x 2400 mm for partitions, 450 x 1200 mm for a mandir door and 600 x 600 mm for false-ceiling panels. A panel larger than 1220 x 2440 mm needs more than one 8 x 4 ft board.

Choose the use and size, then download the DXF. It is in millimetres, with the panel outline on one layer and every cut-out as a closed shape on another, so most CNC software can open it. Send it with the PDF drawing to your CNC operator, or send us the design and size on WhatsApp; we'll suggest the right board and share a quote.

The page keeps at least 6 mm of board between cut-outs in wood, or 3 mm in metal sheet, and a solid border that is 40 mm unless you change it. If a size makes the bars or the cut-outs too small for the router bit, it says so and offers a fix, such as a larger motif. Use 12 to 18 mm board for anything that is handled or hinged.

MDF is better for dry indoor rooms: it routes smoothly and gives the best painted or PU finish. WPC is better wherever water or damp is likely, such as bathrooms, balconies and wash areas, because it is waterproof and does not rot. Many homes use MDF inside and WPC near water.

Sand the cut edges smooth, then seal them with primer, because routed MDF edges soak up paint. Give two coats of primer with a light sand between them, then paint or spray PU. For a backlit panel, paint the back face too. WPC can be painted after a light sand and a suitable primer.

Boards for CNC jaali work

Ready to cut?

Send us the design and size.

We'll suggest the right board and share a quote. WhatsApp is fastest.

Call Now WhatsApp