Plywood guide

MR vs BWR vs BWP plywood: which grade for which room

Bajrang Bali Plywood, Vishnu Garden, DelhiUpdated October 20264 min read

Short answer

MR plywood suits dry rooms such as bedrooms and wardrobes. BWR handles kitchen dry zones and occasional splashes, and passes an 8 hour boiling test. BWP is marine grade, passes a 72 hour boiling test, and is the one for bathrooms and the kitchen sink area.

MRDry roomsBWR8 hours boiling testBWP72 hours boiling test
The three grades by water resistance. Longer bar means longer boiling test.

What do MR, BWR and BWP plywood mean?

MR is Moisture Resistant. BWR is Boiling Water Resistant. BWP is Boiling Water Proof, also called marine grade. The grade is mostly about the glue between the layers, because water and humidity attack the glue first.

In India, the Bureau of Indian Standards sets the tests. IS:303 covers general purpose plywood such as MR and BWR, and IS:710 covers marine plywood, which is the standard BWP is made to.

Which plywood grade should I use in each room?

Match the grade to how much water the spot sees. Bedrooms and living rooms are dry, kitchens are mixed, and bathrooms are wet.

WhereGradeWhy
Bedroom wardrobe, study tableMRDry room, low risk
Partitions, office furnitureMR or BWRBWR for everyday durability at 18 mm
Kitchen dry zones, dadoBWRHandles steam and the odd splash
Under the sink, kitchen wet zoneBWPStays sound near leaks and standing water
Bathroom cabinets and vanityBWPMarine grade, built for steam and splashes
Exterior cladding, balconyBWPNeeds the strongest water bond

How do the boiling tests separate the grades?

In the standard test, a sample is boiled and then checked to see if the layers stay bonded. BWR is rated for 8 hours of boiling water. BWP is rated for 72 hours.

No cabinet will ever sit in boiling water. The test is a way to measure how strong the glue bond is. A longer boil means the layers are far less likely to open up in Delhi monsoon humidity or bathroom steam.

What thickness of plywood do I need?

Thickness depends on the job more than the grade. These are the common choices:

  • 6 mm: drawer bottoms and side panels.
  • 9 mm: wardrobe backs and light shutters.
  • 12 mm: light wardrobes and kitchen carcass.
  • 16 mm: heavy shutters and vanity tops.
  • 18 mm: modular kitchens and full wardrobes.
  • 25 mm: main doors and heavy work tops.

Our full range runs from 6 mm to 25 mm across all three grades, see plywood in Delhi.

Can I mix plywood grades in one kitchen?

Yes, and it is a sensible way to build. Put BWP where water actually reaches, such as the sink base and the wall behind it. Use BWR for the rest of the kitchen and MR for the bedroom wardrobes.

If you want a smoother laminate finish, also compare it with HDHMR boards, which many carpenters now use for modular kitchens. You can preview colours in our kitchen visualizer before you decide.

How do I check a plywood sheet before buying?

  1. Ask which grade it is and for the brand and mark printed on the sheet.
  2. Look at the edge. The layers should be even, with no gaps or holes.
  3. Check the face is flat and the thickness matches what you ordered.
  4. Match the sheet to the room, not just the price.

General buying guidance, not a lab test. For a project quote, send us the room list.

Do I need BWP plywood for the whole house?

No. BWP costs more to make because of its stronger bond, and a dry bedroom does not need it. Spend on BWP where water is a real risk: the sink area, bathrooms, balconies and anywhere a leak could reach the board. Use MR or BWR elsewhere.

What mistakes should I avoid when choosing plywood?

  • Choosing by thickness alone. An 18 mm MR sheet and an 18 mm BWP sheet look alike but behave very differently near water.
  • Leaving cut edges bare. Water enters at the edges first, so seal or edge-band every cut near a wet spot.
  • Using one grade for everything. It is either wasteful or risky. Match each room to its grade.
  • Skipping the grade check. Ask for the grade in writing on the quote, not just a verbal answer.

Common questions

Is BWR plywood waterproof?

No. BWR is boiling water resistant, which means it handles splashes, steam and humidity well, but it is not made for constant soaking. For sink areas and bathrooms, choose BWP.

Can I use MR plywood in a kitchen?

Only away from water, such as a high wall unit in a ventilated kitchen. Base units and the sink area are better in BWR or BWP, because humidity and leaks reach the glue first.

Which plywood is best for a bathroom vanity?

BWP. It is the marine grade that passes the 72 hour boiling test, so steam and splashes will not open up the layers. Seal the cut edges and keep the board off a wet floor.

Updated October 2026.

Related products and tools

More guides

Call Now WhatsApp